StrobeGuard® SS-122/125
High Intensity White Strobe Lighting System

Compliance
FAA AC: 150/5345-43
ETL Certified L-856 High Intensity Lighting
ICAO Annex 14, Type A High Intensity Obstacle Light
Canadian Aviation Regulation 621.19
MIL-C-7989, DGAC of Mexico

SS-125 Obstruction Strobe Light
The StrobeGuard SS-125 is a single enclosure obstruction light designed to meet or exceed the requirements of Advisory Circular 150/5345-43. The SS-125 is recommended for new installations overseas and domestic replacement sites.

The enclosures are fabricated from 304L stainless steel. All plug-in printed circuit boards are protected with a coating which meets the physical and electrical requirements of MIL-I-46058B. The SS-125 is supplied with a lightning arrestor capable of withstanding repeated 10,000 ampere current surges. Operated with the SS-122 Controller, the system is completely self-activating for monitoring and identifying any malfunctioning light and is equipped to initiate a remote alarm. The number of SS-125 obstruction lights used on an installation depends upon the type of obstruction and its height.

SS-122 Controller
StrobeGuard Controllers contain the flash interval and timing circuits, intensity selection controls, and monitoring receivers with status indicators required to operate the SS-125 strobe light. The controller is of modular construction with solid state circuitry for long life and ease of maintenance. StrobeGuard controllers are designed to operate up to 32 obstruction lights at distances up to 4700 feet. Each controller is equipped with the necessary manually operated controls to test all modes of operation. Digital monitor lamps are provided and illuminate when a flashhead or power supply is not operating as required. Each monitor lamp is operated in a coded mode indicating the location of the flashhead/power supply which is malfunctioning.

SS-124 Ambient Sensor
The SS-124 Light Sensor continuously monitors the ambient lighting conditions and inputs to the StrobeGuard controller the necessary information to automatically control the switching of daytime, twilight and nighttime modes of operation. The SS-124 is easy to install with the built-in mounting holes.