Our Runway Closure Marker is an effective and efficient method to warn pilots of closed runways and taxiways and to protect maintenance crews working on runways. The Marker is designed with four 14-foot arms on a portable trailer. The high output lights can be seen from 10 to 50 miles away, giving pilots time to adjust their heading.

Features
• Easily set up by one person in five minutes, without tools
• Four folding arms open to 14 foot length
• 20 spotlights deliver over 280,000 candelas at beam center
• Visible 10-50 miles from runway under VFR
• Selectable brightness levels to suit environmental conditions
• Photocell dimming for night operation
• Four rear-mounted lamps allow visual monitoring from back side
• Powered by a three-cylinder, liquid-cooled Mitsubishi diesel engine and Marathon brushless generator
• Operates 140 hours between fuel fills
• Highway towable, with a standard 2" hitch coupler
• 2200-pound, DOT-compliant trailer
• 4 swivel leveling jacks
• Adjustable light beam angle
• Optional rear hitch, allows tandem towing of 2 units

Set Up Procedure (3 minutes):
1. Level as necessary using 3 leveling jacks.
2. Extend the 4 light assembly arms.
3. Tilt the light to the upright position.
4. Start the generator and activate the lights.

Light Assembly Specifications
• Arm length 14 feet when operating
• Hinged to generator housing, swings upright for use, swings to horizontal position when stowed
• Assembly arms fold to a 5'x5' square for transport and storage
• Arms constructed of 4"x4" extruded aluminum, with yellow epoxy powder-coat paint
• Twenty 90-watt halogen lamps mounted in front, plus 4 monitor lamps in rear, 24 total
• Narrow-spot PAR 38 lamp, 2500 hour rated life, readily available
• Lamps flash 2.5 seconds on, 2.5 seconds off
• Solid-state flasher, no mechanical contacts
• Photocell automatically reduces intensity at night
• 2-year warranty on light assembly, excluding lamps