Flight Light Logo Flight Light Inc.
2708 47th Ave.
Sacramento, CA 95822-3806
Toll Free (800) 806-3548
Phone (916) 394-2800
Fax (916) 394-2809
Made in the USA

L-810 LED
Night Vision Compatible
Steady-Burning Red
Obstruction Light


Home - What's New - Who We Are - Products - Request Quote - Search - Contact Us - Terms - Links

Compliance and Applications
FAA AC 150/5345-43F (L-810); EB-67
ICAO Annex 14 (Low Intensity Obstacle Light)
Transport Canada CAR 621.19
DGAC of Mexico
MIL-C-7989

Our Night Vision Compatible, omni-directional, red, steady-burning, LED obstruction light is designed for marking tall structures such as buildings, towers, masts, cranes, meteorological towers, chimneys and other hazards to aircraft. This energy-saving LED light is a direct replacement for incandescent fixtures, providing years of reliable and maintenance-free operation. Available in single, double, and retrofit configurations; optional solar drive package.

What Does NVG Friendly Mean?
Both the FAA and Transport Canada have issued safety alerts warning that common LED obstruction lights pose a hazard to pilots using Night Vision Goggles (NVGs). This is due to the fact that NVGs typically use filters to block cockpit lighting from saturating the imaging system. This has the unintended effect of making LED obstruction lights invisible to pilots.

In response, we have incorporated NVG Friendly technology into our fixture, giving pilots using night vision goggles unmatched visibility of airfield perimeters, buildings, and towers. The L810LEDNV light is the first LED L-810 available to ensure that your structure is visible to all pilots, making it the first true LED replacement for incandescent obstruction lights.

Why Our L810LEDNV is Better
• Direct replacement for existing incandescent light.
• Lasts up to 20 times longer than an incandescent light.
• Uses 96% less power than an incandescent light.
• Night Vision Goggle & NVIS Compatible.
• No regular maintenance.
• Available in single and dual configurations with bottom or side conduit outlets.
• Can be operated in steady-burning or flashing mode (controller not supplied).
• Photocell option for automatic activation at night.
• Self-contained wiring compartment eliminates additional boxes.
• Weather/corrosion resistant.
• Resistant to shock and vibration.
• Operates from -67°F to 131°F (-55°C to +55°C).
• 5 year warranty.

Specifications
Power consumption: 3.4W (DC); 3.8W (AC)
Power source: 120-277 VAC; 12-48VDC
Intensity: 32.5 candelas
Dimensions: 5.5" dia. x 7.85" height (single)
Weight: 2 lb. (single); 5 lb. (double)
Estimated lifetime: 70,000+ hours

L-810 LED Obstruction LIghts


Red Obstruction
Lighting Standards Chart
FAA Style A
(PDF, 507KB)



Obstruction Lighting Controls
Lighting controls are designed for use when multiple obstruction light fixtures are to be controlled with common electronics. The electronic control module comes in a cast iron device box with threaded hubs on both top and bottom. Replacement modules (controls without device box) are also available upon request.


Photocell
Model 81020 120VAC, 1000W photocell. FAA style photocells activate at 35 ft-cd and turn off at 58 ft-cd. A 45 second time delay prevents activation and de-activation from momentary light conditions. Does not come with device box, includes 1/2" threaded male fitting.

Model 81021 120VAC, 4800W photocell. Meets FAA/FCC requirements for obstruction lighting. Energized at 35 ft-cd and de-energized at 60 ft-cd. Time delay eliminates contact chatter. Contains dual 20A load contacts. Front plastic housing mounts to cast aluminum junction box (included).

Model 81022 Hazardous Location Photocontrol Unit. Outdoor lighting control for exterior lighting in hazardous locations: explosion proof, dust-ignition proof, and weatherproof. Nominal Voltage 50/60 Hz: 120/208/240/277. Voltage Range: 105-305. Housing: sand cast copper-free aluminum - epoxy powder coated.



Obstruction Lighting Controllers
Compliant to:
FAA AC 150/5345-43F
ICAO Annex 14
Canadian CAR 621.19

Applications
Our Obstruction Lighting Controllers are suitable for use with LED beacons and sidelights used to mark towers, chimneys, buildings, and other structures.

Specifications
Power Requirements: 120 or 240V AC 60Hz standard (115 or 230V AC, 50Hz available)
Enclosure Rating: NEMA 4x fiberglass
Surge Protection: MOV
Alarm Type: Dry Contacts, Form "C"
Photocell: Standard on all controllers.
Warranty: 2 year limited warranty


5/10/2012

Call for your airport lighting needs:
1-800-806-3548

Home - What's New - Who We Are - Products - Request Quote - Search - Contact Us - Terms - Links

Copyright © 2012 Flight Light Inc. All rights reserved.
Website by Larzelere Design