2.7 FAA L-868 Light Base, Mud Plates, Flange Rings, Spacers, Extensions, and Two Part Base Cans

Home - What's New - Who We Are - Products
Quote Form - Search Site - Contact Flight Light

FAA L-868 Light Base,
Mud Plates, Flange Rings,
Spacers, Extensions,
and Two Part Base Cans

Flight Light Inc.
2708 47th Ave.
Sacramento, CA 95822-3806
Toll Free (800) 806-3548
Phone (916) 394-2800
Fax (916) 394-2809

L-868 Light Base
Compliance and Applications

FAA: AC 150/5345-42, L-868 Load Bearing

Our FAA approved, load bearing light bases are designed for locations which experience aircraft and other heavy vehicular loading. The base typically supports an in-pavement light fixture and houses a powering isolation transformer. It can also be used solely as a junction box or transformer housing.

Load Bearing Standard FAA L-868 Sizes:
AA* = 8" dia. (7-1/4" bolt circle)
A = 10" dia. (9-1/4" bolt circle)
B = 12" dia. (11-1/4" bolt circle)
C = 15" dia. (14-1/4" bolt circle)

Standard Height: 24"

Material: Hot dipped galvanized steel standard.

Conduit Openings: Grommets to accommodate 2" PVC standard. Hubs available. Other opening sizes are available.

Conduit Locations: Locations are designated based on a 360 degree circle as follows:

0° and 180° are standard. All conduit locations must be specified at time of order. Center of standard opening is 2-1/2" above the bottom of the light base.

Shipping Info: Shipped with 6 stainless steel bolts and a protective 1/2" thick plywood cover.

Options: Must be specified.
• Grounding: Grounding straps must be specified at time of order. Internal, external or both are available.
• Drain holes: 3/4" drain hole standard. Other sizes available. Please specify.
• Other options: Please specify as needed.

Click to enlarge


	L-868 Mud Plates • Usually shipped installed on base. • Steel construction with hot dip galvanized finish.


	L-868 Y Flange Rings (Concrete Ring) • Height: 3/8" to 3/4". • Steel construction with hot dip galvanized finish. • Gasket sold separately.


	L-868 Spacers and Extensions • Spacer height: 1/16" to 1-5/8" • Extension height: 1-3/4" to 8". • Steel construction with hot dip galvanized finish. • Gasket sold separately.

	L-868 Two Part Base Cans • Facilitates overlay paving. • Steel construction with hot dip galvanized finish.

2.7
Data Sheet: L-868
9/13/2006

Call for your airport lighting needs:

1-800-806-3548

Home - What's New - Who We Are - Products - Quote Form
Search Site - Contact Flight Light

Copyright © 2008 Flight Light Inc. All rights reserved.
Website by Larzelere Design